Blog: Lego and aluminum phone camera tripod mount: camera-tripod-adapter-side-holes.ngc

File camera-tripod-adapter-side-holes.ngc, 3.1 KB (added by retracile, 3 years ago)

camera-tripod-adapter-side-holes.ngc

Line 
1( Technic pin holes for each edge of the tripod adapter )
2
3( Technic pin hole at offset 0.315 )
4( outer ring )
5( Generated g-code for drilling a hole with an endmill )
6( Center at X 0.315 Y -0.220 )
7( Z 1.220-1.260 )
8( R 0.1190 and tool width of 0.125 )
9( Depth of cut 0.020 and feed rate 3.000 )
10G20 ( imperial )
11G90 ( absolute coords )
12F3.000 ( set feed rate )
13G17 ( XY plane )
14G91.1 ( incremental arc distance )
15G53 G0 Z9.700 ( move to safe Z )
16G0 X0.2585 Y-0.220
17G0 Z1.510
18G1 Z1.260
19( Helix down )
20G2 Z1.220 I0.0565 J0 P3
21( Flat bottom )
22G2 I0.0565 J0
23( done )
24G53 G0 Z9.700 ( move to safe Z )
25( Full depth hole )
26( Generated g-code for drilling a hole with an endmill )
27( Center at X 0.315 Y -0.220 )
28( Z 0.945-1.220 )
29( R 0.0945 and tool width of 0.125 )
30( Depth of cut 0.020 and feed rate 3.000 )
31G20 ( imperial )
32G90 ( absolute coords )
33F3.000 ( set feed rate )
34G17 ( XY plane )
35G91.1 ( incremental arc distance )
36G53 G0 Z9.700 ( move to safe Z )
37G0 X0.2830 Y-0.220
38G0 Z1.470
39G1 Z1.220
40( Helix down )
41G2 Z0.945 I0.0320 J0 P14
42( Flat bottom )
43G2 I0.0320 J0
44( done )
45G53 G0 Z9.700 ( move to safe Z )
46
47( Technic pin hole at offset 0.630 )
48( outer ring )
49( Generated g-code for drilling a hole with an endmill )
50( Center at X 0.630 Y -0.220 )
51( Z 1.220-1.260 )
52( R 0.1190 and tool width of 0.125 )
53( Depth of cut 0.020 and feed rate 3.000 )
54G20 ( imperial )
55G90 ( absolute coords )
56F3.000 ( set feed rate )
57G17 ( XY plane )
58G91.1 ( incremental arc distance )
59G53 G0 Z9.700 ( move to safe Z )
60G0 X0.5735 Y-0.220
61G0 Z1.510
62G1 Z1.260
63( Helix down )
64G2 Z1.220 I0.0565 J0 P3
65( Flat bottom )
66G2 I0.0565 J0
67( done )
68G53 G0 Z9.700 ( move to safe Z )
69( Full depth hole )
70( Generated g-code for drilling a hole with an endmill )
71( Center at X 0.630 Y -0.220 )
72( Z 0.945-1.220 )
73( R 0.0945 and tool width of 0.125 )
74( Depth of cut 0.020 and feed rate 3.000 )
75G20 ( imperial )
76G90 ( absolute coords )
77F3.000 ( set feed rate )
78G17 ( XY plane )
79G91.1 ( incremental arc distance )
80G53 G0 Z9.700 ( move to safe Z )
81G0 X0.5980 Y-0.220
82G0 Z1.470
83G1 Z1.220
84( Helix down )
85G2 Z0.945 I0.0320 J0 P14
86( Flat bottom )
87G2 I0.0320 J0
88( done )
89G53 G0 Z9.700 ( move to safe Z )
90
91( Technic pin hole at offset 0.945 )
92( outer ring )
93( Generated g-code for drilling a hole with an endmill )
94( Center at X 0.945 Y -0.220 )
95( Z 1.220-1.260 )
96( R 0.1190 and tool width of 0.125 )
97( Depth of cut 0.020 and feed rate 3.000 )
98G20 ( imperial )
99G90 ( absolute coords )
100F3.000 ( set feed rate )
101G17 ( XY plane )
102G91.1 ( incremental arc distance )
103G53 G0 Z9.700 ( move to safe Z )
104G0 X0.8885 Y-0.220
105G0 Z1.510
106G1 Z1.260
107( Helix down )
108G2 Z1.220 I0.0565 J0 P3
109( Flat bottom )
110G2 I0.0565 J0
111( done )
112G53 G0 Z9.700 ( move to safe Z )
113( Full depth hole )
114( Generated g-code for drilling a hole with an endmill )
115( Center at X 0.945 Y -0.220 )
116( Z 0.945-1.220 )
117( R 0.0945 and tool width of 0.125 )
118( Depth of cut 0.020 and feed rate 3.000 )
119G20 ( imperial )
120G90 ( absolute coords )
121F3.000 ( set feed rate )
122G17 ( XY plane )
123G91.1 ( incremental arc distance )
124G53 G0 Z9.700 ( move to safe Z )
125G0 X0.9130 Y-0.220
126G0 Z1.470
127G1 Z1.220
128( Helix down )
129G2 Z0.945 I0.0320 J0 P14
130( Flat bottom )
131G2 I0.0320 J0
132( done )
133G53 G0 Z9.700 ( move to safe Z )
134